SHEHA, G. (1984). STATIC STIFFNESS OF THE BOLTED CONNECTIONS SUBJECT TO THE NORMAL AND SHEAR LOADS.. test, 2(1st Conference on Applied Mechanical Engineering.), 137-144. doi: 10.21608/amme.1984.49562
G. M.M. SHEHA. "STATIC STIFFNESS OF THE BOLTED CONNECTIONS SUBJECT TO THE NORMAL AND SHEAR LOADS.". test, 2, 1st Conference on Applied Mechanical Engineering., 1984, 137-144. doi: 10.21608/amme.1984.49562
SHEHA, G. (1984). 'STATIC STIFFNESS OF THE BOLTED CONNECTIONS SUBJECT TO THE NORMAL AND SHEAR LOADS.', test, 2(1st Conference on Applied Mechanical Engineering.), pp. 137-144. doi: 10.21608/amme.1984.49562
SHEHA, G. STATIC STIFFNESS OF THE BOLTED CONNECTIONS SUBJECT TO THE NORMAL AND SHEAR LOADS.. test, 1984; 2(1st Conference on Applied Mechanical Engineering.): 137-144. doi: 10.21608/amme.1984.49562

STATIC STIFFNESS OF THE BOLTED CONNECTIONS SUBJECT TO THE NORMAL AND SHEAR LOADS.

The International Conference on Applied Mechanics and Mechanical Engineering
Article 9, Volume 2, 1st Conference on Applied Mechanical Engineering., May 1984, Pages 137-144    PDF (1.97 M)
Document Type: Original Article
DOI: 10.21608/amme.1984.49562
Author
G. M.M. SHEHA
Dr. Eng., Lecturer, Dept. of Production Eng. and Design, Faculty of Eng. and Tech. Menoufia University, Shebin El-Kom, Egypt.
Abstract
This paper discusses the normal and shear stiffness of the bolted connections, It has shown that the shear stiffness can be determined from the parameters that define the normal stiffness of the machined surfaces. The factors affecting the static stiffness have been investigated. A mathematical analysis of the design parameters have been developed. They are ; normal and shear loads, geometry and dimensions of the two mating surfaces. Determination of the static joint stiffness and some basic optimum values would then be within the reach of the designer.
Statistics
Article View: 92
PDF Download: 171