WEAR PROPERTIES OF AUSTEHPERED ALLOYED DUCTILE CAST IRON GEARS | ||
| The International Conference on Applied Mechanics and Mechanical Engineering | ||
| Article 39, Volume 1, 2nd Conference on Applied Mechanical Engineering., May 1986, Pages 83-97 PDF (4.16 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/amme.1986.52051 | ||
| Authors | ||
| B. Elsarnagawy1; M. A. Gaafar2; H. A. Madi3; E. A. Makssoud1 | ||
| 1Material Department, Military Technical College,Cairo, EGYPT. | ||
| 2Automobile Dept., Military Technical College, Cairo, EGYPT. | ||
| 3Deputy Chairman, Helwan Iron Foundries, Cairo, EGYPT. | ||
| Abstract | ||
| Recently austemopred ductile cast iron is utilized for production of gears in automotive industry in order to reduce the production costs. The problem of low hardenability of unalloyed ductile cast iron dictated the use of alloyed ductile cast iron. The present work is devoted to investigate the wear properties of austempered alloyed ductile cast iron 2% Ni, 0.5% Mo which is chosen to replace forged gears produced from carburized and hardened steel DIN 34 17220. The programme of wear tests is based on the comparison between the performance of austempered alloyed ductile cast iron and steel DIN 34 17220. Disc type wear test specimens with diameter of 40 mm and thickness 10 mm were made from alloyed ductile cast iron and from the steel. The tests were carried out at dry slidinft condition, wet sliding condition, and wet sliding plus 10% rolling. The results of wear tests showed that the wear characteristics of austempered alloyed ductile cast iron are more suitable for gear applications than the classical carburized and hardened steel DIN 34 17220. | ||
|
Statistics Article View: 88 PDF Download: 85 |
||
