Mathematical Modeling and Optimization of Polymer Composite Pine Fins | ||
| ERJ. Engineering Research Journal | ||
| Article 4, Volume 42, Issue 1, January 2019, Pages 35-40 PDF (710.12 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/erjm.2019.66267 | ||
| Author | ||
| S. Ayyad | ||
| Faculty of Engineering, Shebin El-Koom, Egypt. | ||
| Abstract | ||
| Thermal basins are used in the industry, which consists of arrays of fins, which are designed in various forms for thermal packaging of electronic devices. The best design for the consumption of thermal basins for less mass and less energy should include certain considerations, such as the choice of engineering materials and the provision of high fiber thermal conductivity fibers that are made of carbon fiber and graphite to increase thermal conductivity. This use is better than using conventional materials such as aluminum and copper. In order to achieve optimum objectives for engineering applications, an optimum design for the use of these thermal banks should be based on a precise balance between the best thermal design and the economic reduction of material consumption and minimal energy flow. The current research presents a systematic study of the thermal performance of an air cooled heat sink designed by high thermal conductivity PPS polymer. A nested pin fin set has been used to design and improve such a natural heat sink that is cooled by air. | ||
| Keywords | ||
| modeling; Optimization; pin fins; ANSYS; composite material | ||
|
Statistics Article View: 160 PDF Download: 251 |
||
