Recycling Technology With 3D Printing Technology Between Art and Application | ||
| Journal of Design Sciences and Applied Arts | ||
| Article 5, Volume 1, Issue 2, June 2020, Pages 67-76 PDF (483 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/jdsaa.2020.28496.1008 | ||
| Authors | ||
| Menna Rizk* 1; Nessreen Y. Ibrahim2; Nevine Farghaly3; Abdel khalek Nasr4 | ||
| 1Decoration Department- Faculty of Applied Arts- Helwan University- Egypt | ||
| 2Decoration Department, Faculty of Applied Arts, Helwan University, Giza, Egypt. | ||
| 3Decoration department- faculty of applied arts- helwan university | ||
| 4Decoration department- faculty of applied arts- helwan university- Egypt | ||
| Abstract | ||
| With the rapid development and the quantitative industrial age, and with the increase in production and consumption and the change in the human lifestyle, it has become one of the most difficult challenges facing environmental requirements, which is dealing with the dilemma of depleting non-renewable resources and increasing environmental pollution. Plastic technician in the external environment, which is the environmentally appropriate disposal of waste. The research problem lies in getting rid of pollution that causes non-exploitation of raw materials waste, especially plastics that contribute to the depletion of the environment, where the primary goal of creativity is to reformulate the use of these materials Wasted in synthetic art work. The use of 4D printing technology poses many challenges, to take advantage of non-renewable materials to reduce environmental pollution, and to achieve environmental requirements to reach the design of mobile artistic elements in the external environment more environmentally sustainable, and the availability of a large number of materials and printing platforms for these materials, as 3D printers convert the outputs of computer design into concrete figures using modeling machines that move in several directions in a vacuum. The theoretical art work of the research paper includes a study on the materials to be recycled and used with 3D printing technology and the possibility to adapt them to design a moving artwork in the external environment | ||
| Keywords | ||
| Sustainable kinetic sculpture; 3D Printing; 4D Printing; Recyclable materials; Filment | ||
| References | ||
|
David A. Dornfeld • Barbara S. Linke Editors: Leveraging Technology for a Sustainable World - Proceedings of the 19th CIRP Conference on Life Cycle Engineering, University of California at Berkeley, Berkeley, USA, May 23–25, 2012. Thomas Campbell, The Next Wave: 4D Printing - Programming the Material World, Atlantic Council, Institute for Critical Technology and Applied Science (ICTAS), January 2014. Dilip Gurung, Technological comparison of 3D and 4D printing, Degree Thesis Degree Programme in Plastics, Technology, 2017. Ming-You Shie 1,2,3 , Yu-Fang Shen 3,4, Suryani Dyah Astuti 5 , Alvin Kai-Xing Lee 2,6 , Shu-Hsien Lin 2 , Ni Luh Bella Dwijaksara 3,5 and Yi-Wen Chen, Review of Polymeric Materials in 4D Printing Biomedical Applications, November 2019. Nicole Jewell, Habitat, 30,000 recycled water bottles make up this 3D-printed pavilion,URL:: https://inhabitat.com/30000-recycled-water-bottles-make-up-this-3d-printed-pavilion/, 2019. Designboom, MEAN* designs 3D printed pavilion in dubai to reconnect visitors with nature, URL:: https://www.designboom.com/architecture/mean-3d-printed-pavilion-dubai-nature-12-18-2019/, 2019. Joanne Ee Mei Teoh *, Jia An ID , Xiaofan Feng, Yue Zhao, Chee Kai Chua ID and Yong Liu, Design and 4D Printing of Cross-Folded Origami Structures: A Preliminary Investigation, Published: 3 March 2018. | ||
|
Statistics Article View: 464 PDF Download: 1,757 |
||
