Design and Implementation of CubeSat Ground Station Subsystem | ||
| The International Undergraduate Research Conference | ||
| Article 28, Volume 2, Second International Undergraduate Research Conference, IUGRC, 2017, Pages 107-107 PDF (517.06 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/iugrc.2017.90647 | ||
| Authors | ||
| Ahmed Abdelhady1; Mohammed Elsayed1; Mohammed Abdelnaser1; Bishoy Karam1; Elsayed Soleit2; Ibrahim F. Tarrad3; Saad Elsayed4 | ||
| 1Electronics and Communication Department, High Institute for Engineering and Technology, AL-Obour, Egypt. | ||
| 2Prof. Dr. Eng., Electronics and Communication Department, High Institute for Engineering and Technology, AL-Obour, Egypt. | ||
| 3Associated Professor, Electronics and Communication Department, Faculty of Engineering, Al-Azhar University, Egypt. | ||
| 4Assistant Lecturer, Electronics and Communication Department, High Institute for Engineering and Technology, AL-Obour, Egypt. | ||
| Abstract | ||
| The purpose of this project is to demonstrate CubeSat Ground Station. The Ground Station is responsible for sending commands ( Voice or image ) to the satellite and receiving all data from satellite (Telemetry information) then analysis all data received to insure the data are received corrected and take the corresponding action according to the analysis. A simulation analysis is carried out for the analysis by Arduino Mega 2560 and C + program. The analysis carried for received and transmitted image from ground station to CubeSat and telemetry. Also analysis carried out for check the data by cyclic redundancy code. The results show that it’s extremely data verification. | ||
|
Statistics Article View: 137 PDF Download: 75 |
||
