Microcontroller based Furnace Oil Tank Level Control System | ||
| The International Undergraduate Research Conference | ||
| Article 51, Volume 2, Second International Undergraduate Research Conference, IUGRC, 2017, Pages 122-122 PDF (469.73 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/iugrc.2017.90897 | ||
| Authors | ||
| Khaled Alzahrani1; Rami Alzahrani1; Badar Alsubaiee1; Mohammed Afandi1; Sivadasan Kottayi2; Raed Althomali3 | ||
| 1Yanbu Industrial College, Royal Commission Yanbu Colleges & Institutes, Saudi Arabia. | ||
| 2Lecturer, Yanbu Industrial College, Royal Commission Yanbu Colleges & Institutes, Saudi Arabia. | ||
| 3Assistant Professor, Yanbu Industrial College, Royal Commission Yanbu Colleges & Institutes, Saudi Arabia. | ||
| Abstract | ||
| Bunker fuel (Furnace oil) is a fraction obtained from petroleum distillation. It is highly viscous oil, but generally used as fuel for furnaces after preheating to 77-104℃. At this temperature, its viscosity will be reduced and possible to pump to furnace. Optimum combustion control of furnace is possible if fuel flow is maintained constant. A system has been designed which can supply constant flow of furnace oil to combustion control system of furnace. A microcontroller (Arduino Uno) is used to control the process. The designed system consists of two tanks. The preheating of furnace oil is done in tank-1 and constant level is maintained in tank-2. Since constant level of oil is maintained in tank-2, output from this tank has a constant flow and can be fed to Furnace as fuel. Oil temperature in tank-1 is maintained at 85±3℃ by the ON-OFF control. When oil temperature reached to 82℃, microcontroller switches on a pump. The pump starts pumping the oil to the second tank through a pneumatic valve. With the help of a level switch, level is monitored and microcontroller controls the level of tank-2 using a pneumatic valve. | ||
|
Statistics Article View: 97 PDF Download: 83 |
||
