SOME PHYSICAL, MECHANICAL AND AERODYNAMIC PROPERTIES OF QUINOA SEEDS (Chenopodium quinoa Willd) | ||
| Misr Journal of Agricultural Engineering | ||
| Article 11, Volume 35, Issue 4, October 2018, Pages 1365-1382 PDF (652.08 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/mjae.2018.95306 | ||
| Authors | ||
| M. M. Badr1; A. S. EISSA2 | ||
| 1Assoc. Prof. of Ag. Products Process Eng. Dept., Fac. of Ag. Eng., Al Azhar Univ., Cairo, Egypt. | ||
| 2Lecturer of Ag. Products Process Eng. Dept., Fac. of Ag. Eng., Al Azhar Univ., Cairo, Egypt. | ||
| Abstract | ||
| The aim of the present study is to study some physical, mechanical and aerodynamic properties of quinoa seeds (Chenopodium quinoa Willd.), to help in designing and developing of specific machine and their operations such as harvesting, cleaning and milling processes. The properties were determined at moisture content of quinoa seed 11.60% d.b. Three principal dimensions (length, width and thickness) of quinoa seeds were measured using image-processing technique. The highest value of seed length, width and thickness were 2.91, 2.68 and 1.10 mm respectively, while the lowest value of seed length, width and thickness were 1.38, 1.12 and 0.49 mm respectively. The highest value in dynamic angle of repose 30.0° for plastic while the lowest value in dynamic angle of repose 26.3° for galvanized sheet.The lowest values of static coefficient of friction was 0.46 with plywood while the highest value was 0.65 with glass. The seeds gave values of 0.79 m/s and 88.25for average terminal velocity and average Reynolds numberrespectively, so, the flow was laminar. | ||
| References | ||
|
ASAE Standards (1999). Standard Engineering Practices Data (46th Edn). American Society of Agricultural Engineers, St Joseph, MI, USA
Awady M. N. and A. S. El-Sayed (1994).Separation of peanut seeds by air stream. (Egypt); Misr J. Ag. Eng., 11(1): 137-147.
Brenes E, F. Crespo and K. Madrigal (2001). El cluster de quinoa en Bolivia: Diagn!ostico competitivo y recomendaciones estrat!egicas. (The quinoa cluster: competitive diagnosis and strategic recommendations). Documento Proyecto Andino de Competitividad, 54pp. Instituto Centroamericano de Administraci!on de Empresas INCAE
FAO (2011). Quinoa: An ancient crop to contribute to world food security. Technical report of the 37th FAO Conference. Rome, Italy.
Gallagher, E., Gormley, T. R., and Arendt, E. K. (2004). Recent advances in the formulation of gluten-free cereal-based products. Trends in Food Science & Technology, 15(3-4), 143-152
Kachru, R. P., Gupta, R. K., and Alam, A. (1994). Physico-chemical constituents and engineering properties of food crops. Scientific Publishers ISBN: 81-7233-083-9
Mansouri, A., Mirzabe, A. H., & Ráufi, A. (2017). Physical properties and mathematical modeling of melon (Cucumis melo L.) seeds and kernels. Journal of the Saudi Society of Agricultural Sciences, 16(3), 218-226
Mohsenin N. N. (1986).Physical properties of plant and animal materials. Gordon and Breach Sc. Publ., N.Y.
Siqueira V. C., O. Resende and T. H. Chaves (2013).Shape and size of Jatropha beans (Jatropha curcas L.) during drying at different temperatures. (Brazil); Rev. Ceres Viçosa; 60 (6): 820 - 825.
USDA, (2015). United States Department of Agriculture. National Nutrient Databasefor Standard Reference Release, 28 (Basic Reports).
Vilche, C., M. Gely,., and E. Santalla, (2003). Physical properties of quinoa seeds. Biosystems Engineering, 86(1), 59-65. | ||
|
Statistics Article View: 349 PDF Download: 396 |
||
