MECHANICAL PROPERTIES OF PARTICLEBOARD PANELS MADE FROM AGRICULTURAL WASTES | ||
| Misr Journal of Agricultural Engineering | ||
| Article 18, Volume 35, Issue 1, January 2018, Pages 319-338 PDF (719.14 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/mjae.2018.96202 | ||
| Authors | ||
| Zakia Hussein1; Taha Ashour2; Mervat Khalil3; Adel H. Bahnasawy2; Samir A. Ali2 | ||
| 1Demonstrator of Agric. Eng., Fac. of Agric., Benha Univ., Egypt | ||
| 2Professor. of Agric. Eng., Fac. of Agric., Benha Univ., Egypt. | ||
| 3Professor at Institute of building physics and environment, National reserch center of housing and buildings, Cairo, Egypt. | ||
| Abstract | ||
| The aim of this study is to characterize the mechanical properties of particleboard (tensile strength (TS), compressive strength (CS), modulus of rupture (MOR) and modulus of elasticity (MOE)) as affected by various parameters. The effects of waste type, particleboard density and resin content on the mechanical properties of the particleboards were investigated. Also, the possibility of using treated rice straw to improve the properties of the particleboards was evaluated. The results showed that an improving in the mechanical properties of rice straw particleboards with increasing the density of particleboard and the added resin content in the mixture. While the internal bond (IB) initially increased then decreased with increasing particleboard density. Finally, the MOR and MOE decreased with increasing resin content. Hot-water treatment induced better performance on the properties of particleboards. | ||
| Keywords | ||
| particleboards; rice straw; flax shives; Urea formaldehyde; mechanical properties | ||
| References | ||
|
Ashori, A., and A. Nourbakhsh. 2008. Effect of press cycle time and resin content on physical and mechanical properties of particleboard panels made from the underutilized low-quality raw materials. Industrial Crops and Products 28:225-230.
ASTM. 2006. Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials: American Society of Testing and Materials, D1037-06 section 9, 11, 12.
Central Agency for Public Mobilization and Statistics (CAPMAS), Agricultursl sector. 2013. Annual bulletin for statistics of the waste and recycling rice straw. In; http//www.capmas.gov.eg..
Donghai, W., and S.S. Xiuzhi. 2002. Low density particleboard from wheat straw and corn pith. Industrial Crops and Products 15.
Guntekin, E., and B. Karakus. 2008. Feasibility of using eggplant (Solanum melongena) stalks in the production of experimental particleboard. Industrial Crops and Products 27:354-358.
Junjun, L., J. Chanjuan, and H. Chunxia. 2012. Flexural Properties of Rice Straw and Starch Composites. AASRI Procedia 3:89-94.
Junjun, L., and H. Chuanhui. 2013. Biodegradable Composites from Rice Straw and Cornstarch Adhesives. Advance Journal of Food Science and Technology 5: 41-45.
Jumhuri, N., R. Hashim, O. Sulaiman, W.N.A. Wan Nadhari, K.M. Salleh, I. Khalid, N.I. Saharudin, and M.Z. Razali. 2014. Effect of treated particles on the properties of particleboard made from oil palm trunk. Materials & Design 64:769-774.
Khristova, P., N. Yossifov, and S. Gabir. 1996. Particle board from sunflower stalks: preliminary trials. Bioresource Technology 58:319-321.
Li, X., Z. Cai, J.E. Winandy, and A.H. Basta. 2011. Effect of oxalic acid and steam pretreatment on the primary properties of UF-bonded rice straw particleboards. Industrial Crops and Products 33:665-669.
Mohdy, F.A., Abdel, E.S., Ayana, Y.M., Sawy, S.M., 2009. Rice straw as a new resource for some beneficial uses. Carbohydrate Polymers 75, 44–51.
Pathak, H., Singh, R., Bhatia, A., Jain, N., 2006. Recycling of rice straw to improve wheat yield and soil fertility and reduce atmospheric pollution. Paddy and Water Environment 4, 111–117.
Pan, Z., Y. Zheng, R. Zhang, and B.M. Jenkins. 2007. Physical properties of thin particleboard made from saline eucalyptus. Industrial Crops and Products 26:185-194.
Tabarsa, T., S. Jahanshahi, and A. Ashori. 2011. Mechanical and physical properties of wheat straw boards bonded with a tannin modified phenol–formaldehyde adhesive. Composites Part B: Engineering 42:176-180.
Tong, J., Y, Ma., and L, Ren. Naturally biological materials and their tribology: a review [J].Tribology, 2001, 21(4):315-320.
Wu, J., X. Zhang, J. Wan, F. Ma, Y. Tang, and X. Zhang. 2011. Production of fiberboard using corn stalk pretreated with white-rot fungus Trametes hirsute by hot pressing without adhesive. Bioresource Technology 102:11258-11261.
Yi, Z., H. Shah, and Y. Yiqi. 2010. Lightweight composites from long wheat straw and polypropylene web. Bioresource Technology 101:2026-2033.
Zheng, Y., Z. Pan, R. Zhang, B.M. Jenkins, and S. Blunk. 2007. Particleboard quality characteristics of saline jose tall wheatgrass and chemical treatment effect. Bioresource Technology 98:1304-1310. | ||
|
Statistics Article View: 307 PDF Download: 3,922 |
||
