EFFECT OF FIRE RETARDANT ON FIRE PERFORMANCE OF PARTICLE BOARDS PRODUCED FROM AGRICULTURAL WASTES | ||
| Misr Journal of Agricultural Engineering | ||
| Article 21, Volume 35, Issue 1, January 2018, Pages 377-394 PDF (741.7 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/mjae.2018.96206 | ||
| Author | ||
| Hend A. M. El-Maghawry | ||
| Lecturer of Agric. Eng., Fac. of Agric., Zagazig Univ., Egypt. | ||
| Abstract | ||
| The feasibility of applying flame retardants usually used to improve fire behavior of pressed wood was evaluated in the present study for the production of fire-retardant particleboard panels. Corn stalks and Peanut shells as a raw material were used for producing particleboards. Boric acid as a fire retardant was mixed with the used raw materials for producing fire retardant particleboards. Experiments were conducted to study some different operating parameters (particleboard thickness and fire retardant percentage) affecting the fire retardant particleboard production. The produced particleboard samples were evaluated in terms of time to ignition, charring depth, char index and charring rate. The experimental results revealed that time to ignition (245 and 220 min), charring depth (2.68 and 3.80 mm), char index (7.56 and 10.11 %) and charring rate (0.66 and 1.04 mm/h) of the produced fire retardant particleboards from corn stalks and Peanut shells, respectively. These results were in the case of using 16 % fire retardant percentage with acceptable particleboard thickness of 22 mm. | ||
| References | ||
|
Ayrilmis, N., Z. Candan, and R. White (2007). Physical mechanical and fire properties of oriented strandboard with fire retardant treated veneers. Holz Roh - Werkst 65: 449–458.
Basson, G. R., and W.E. Conradie (2001). Preservative and fire-retardant composition and combination and process. United States Patent # 6319431.
Canadian Wood Council (2014). 400-99 Bank Street, Ottawa K1P 6B9 September 2014.
Garay, R. M. (2012). Lab testing for p3 moisture resistant particleboards made from wood residues. BioResources 7 (3): 3093–3103.
Güler, C., and Ü. Büyüksarı (2011). Effect of production parameters on the physical and mechanical properties of particleboards made from peanut (Arachis hypogaea L.) hull. BioResources 6 (4): 5027-5036.
Gűler, C., I.S. Halil, and Y. Sevcan (2016). The potential for using corn stalks as a raw material for production particleboard with industrial wood chips. Wood Research 61 (2): 299– 306.
Harada, T. (1996). Charring of wood with thermal radiation: II. Charring rate calculated from mass loss rate. Mokuzai Gakkaishi 42: 194–201.
Harada, T., U. Saburou, and M. Hideaki (2006). Fire resistance of thick wood-based boards. Journal of Wood Science 52: 544–551.
Hume, J. (1992). Assessing the fire performance characteristics of GRP composites. In: International conference on materials and design against fire. London, pp.: 11–15.
Karastergiou, P.S., and J.L. Philippou (2000). Thermogravimetric analysis of fire retardant treated particleboards. Wood and Fire Safety: 385-394.
Khozeini, A., T. Tabarsa, and M. Mashkour (2014). A novel method for manufacturing of wood flour/PP composites with better fire retardancy and mechanical properties. International Journal of Lignocellulosic Products 1 (2): 121-133.
Mikkola, E. (1991). Charring of wood based materials. Proceedings of the third international symposium on fire safety science (Edinburgh), Elsevier Science Publishers: Oxford: 547–556.
Mouritz, A.P., and A.G. Gibson (2006). Fire properties of polymer composite material. Springer, Berlin, pp.: 59–101, Chap 3.
National Building Code of Canada (2010). National Research Council, Ottawa.
Okai, R., O.A. Emmanuel, J.M. Stephen, and K.D. Raphael (2015). Production of Wood Products from Particleboards Manufactured from Agricultural Residues. International Journal of Emerging Technology and Advanced Engineering 5 (9): 30– 38.
Pedieu, R., K. Ahmed, R. Bernard, W. Xia-Ming, and D. James (2012). Fire-retardant properties of wood particleboards treated with boric acid. European Journal of Wood and Wood Products 70: 191-197.
Reham, S. A. (2017). Recycling of agricultural residues for producing high quality pressed wood. Ph.D. Thesis, Faculty of Agriculture, Zagazig University, Egypt.
Rowell, R.M., and S.L. LeVan-Green (2005). Thermal properties in: Rowell RM (ed) Handbook of wood chemistry and wood composites. Boca Raton, London, New York, Washington, DC, pp.: 121–138, Chap 6. | ||
|
Statistics Article View: 316 PDF Download: 556 |
||
