DEVELOPMENT OF A TRACTOR-TRAILED RICE CLEANING AND MILLING MACHINE | ||
| Misr Journal of Agricultural Engineering | ||
| Article 6, Volume 34, Issue 1, January 2017, Pages 83-102 PDF (942.78 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/mjae.2017.96881 | ||
| Author | ||
| A. A. I . AL-Gezawe | ||
| Researcher of Agric. Res. Inst., Agric. Res. Center, Dokki, Egypt. | ||
| Abstract | ||
| The aims of the present research are to develop and evaluate tractor-trailed rice-milling machine. The factors affecting the performance of the developed milling-machine feeding rate, drum speed, grain moisture-content were studied. The performance measurements were productivity, total machine cleaning efficiency, total grain-losses, power required, specific energy and operational cost. The experimental results reveal that the highest values of productivity and machine efficiency were 1.35 Mg/h and 97.3 %. Meanwhile, the minimum required power and the specific energy were 16.82 kW and 14.55 kWh/Mg respectively for tractor-mounted rice milling machine after development, The minimum operating cost was 32.71 L.E/Mg These values were achieved under conditions of feed rate of 1.25Mg/h, drum speed of 800 rpm and moisture content of 14%. | ||
| References | ||
|
Awady, M. N; E. Y. Ghoniem, and A. I. Hashish (1982): Agriculture comparison between wheat combine harvesters under Egyptian conditions. Res. Bul. Ain-Shams Univ.:13p.
El-Raie, A. E. S; N. A. Hendawy and A.Z. Taib (1996). Study ofphysical and engineering properties for some agricultural products. Misr. J. Ag. Eng., 13 (1):211- 226.
Hunt, D. (1983): Farm power and machinery management. 8th Ed. Iowa state Univ., Press Ames, USA. Ames, Iowa, USA: 364-368.
Koide, S. and Y. Nishiyama (2001): Studies on abrasive rice milling (part2) Milling power model and milling energy model. Journal of the Japanese Society of Agricultural Machinery,63 (6) 63-67
Morad, M. M; M. M. Badr, M. M. A. EL- sharabasy and E. I. Abdel - Aal (2013): Development of rice milling machine for different rice varieties to improve product quality. M. J. Ag. Eng.30 (3): 599- 626.
Radwan, S. M. (2001): The potential energy consumption for milling some Egyptian rice varieties. Misr J. Ag. Eng., 18(3): 537-551.
Soltanabadi, M. H. and A. Hemmat (2007): Effect of blade distance and output rate on rice quality in a modified blade-type milling machine. Journal of Science and Technology of Agriculture and Natural Resources,11(1A):135-146. | ||
|
Statistics Article View: 282 PDF Download: 228 |
||
