DESIGN AND MANUFACTURING OF SCREW-EXTRUDER BASED BRIQUETTING MACHINE FOR AGRICULTURAL RESIDUES | ||
| Misr Journal of Agricultural Engineering | ||
| Article 1, Volume 32, Issue 4, October 2015, Pages 1375-1396 PDF (1.5 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/mjae.2015.97587 | ||
| Author | ||
| A. M. El-Sheikha | ||
| Assist.Prof., Ag. Eng. Dept., Fac. of Ag., Damietta Univ., Egypt. | ||
| Abstract | ||
| A Screw-extruder based briquetting machine was developed, manufactured and tested for the utilization of two common different agricultural residues i.e. rice straw and cotton stalks. The manufactured briquetting machine consisted of two major parts. First part is a cutting and crushing unit which receives raw materials from a hopper located above the unit and working based on rotating disc carrying six sets of rectangular blades. Each set has four blades joined together from one side as one unit and rotating with free motion or relatively adjustable with each other. Second part is a pressing and extrusion system which was fixed down the cutting and crushing unit on a metal base has rectangular frame of 1600 x 950 mm. Cut and crushed material is being transferred by delivering cone to pressing and extruder system through a conical opening with net having specific diameter of mesh to pass only desired particles sizes. An electrical motor with reduction unit used to provide the machine with required power. The experiments carried out during 2013-2014. The machine has been tested with constant compression ratio, die dimensions and ratio of the screw volume utilization at the feeder area. Study variables were; two residues (rice straw and cotton stalks), four material moisture levels of mixed materials (25, 30, 45 and 40 %), and three bending material percentages 2, 4, 6 % of residue raw material. Moisture content was measured and adjusted to be at the required level before starting the process of briquetting. Produced briquettes with different moisture content tested against their stability and durability and their densities and producing time have been recorded. Results showed that briquettes produced by screw-press based briquetting machine are hard enough to be transported when get treated at moisture content of 30 and 35 %. More shattered pieces were observed at lower moisture content of 25%. In addition, in both residue types, adding more bender led to higher impact resistance (IRI). Sufficient production rate of briquettes have been obtained at 30% moisture content, where, production rates were 120.33, 128.67, 132.67 kg/h for rice straw mixed with 2, 4 and 6 percent of bending material respectively and for cotton stalks, the production rates were 119.00, 123.33, and 131.33 kg/h with 2, 4 and 6 percent of bending material respectively. However, higher moisture contents of 35 and 40 % lead to lower production rate. Adding more bending material to the mixture resulted to more density for both rice straw and cotton stalks material and released briquettes with higher moisture content gave higher density. | ||
| Keywords | ||
| Briquetting machine; screw-extruder; rice straw; cotton stalks; density; durability | ||
| References | ||
|
Abakr, Y. A. and Abasaeed A. E. (2006). Experimental Evaluation of a Conical-Screw Briquetting Machine for the Briquetting of Carbonized Cotton Stalks in Sudan. Journal of Engineering Science and Technology 1(2):212-220.
AmerEissa A.H., Gomaa A.H., Baiomy M.H., and Ibrahim A. A. (2008). Physical and Mechanical Characteristicsfor Some Agricultural Residus.Misr J. Ag. Eng., 25(1): 121-146.
Bhattacharya, S.C. (2002). A Global Review with Emphasis on Developing Countries, paper presented in First World Pellets Conference, Stockholm, Sweden.
Bhattacharya, S. C., Augustus, L. M. and Rahman Md. M. (2002). A Study on Improved Biomass Briquetting, Energy for Sustainable Development, vol.6 (2): 67-71.
Conveyoreng (2012). Screw Conveyor components & design. Version 2.20.Conveyor Engineering & Manufacturing. 1345 76th Ave SW Cedar Rapids, IA 52404. USA. Available at:
http://www.conveyoreng.com/wp-content/uploads/downloads/2013/02/CEMC-Screw-Conveyor-Manual-2.20.pdf
Demirbas¸A., and A. Sahin(1998). Evaluation of biomass residue:1. Briquetting waste paper and wheat straw mixtures.Fuel Processing Technology 55, 175–183.
Kulinowski, P., and Kasza, P. (2012).Screw conveyors. Department of Mining, Dressing and Transport Machines AGH.AGH University of Science and Technology.Poland. Available at:
http://www.kmg.agh.edu.pl/sites/default/files/pdf_ScrewConveyors_eng.pdf
Khurmi, R.S. and Gupta J.K. (2005). Text Book of Machine Design.Chand (S.) & Co Ltd, India; 25th edition. ISBN-13: 978-8121925372- 8121925371, 1230 pages.
Kumar, A., Cameron, J. B., Flynn P. C. (2003). Biomass power cost and optimum plant size in western Canada.Biomass and Bioenergy 24, 445-464.
Morsy, M.I.N. (2011).Properties of Rice Straw Cementitious Composite.Published PhDThesis .Department of Civil Engineering and Geodesy.TecnischeUniversitätDarmstadt. GermanyP: 62:64. Available at:http://tuprints.ulb.tudarmstadt.de/2847/1/Dissertation_Morsy_2011.pdf
Nalladurai, N. R., and Morey V.(2006). Factors Affecting Strength and Durability of Densified ProductsPaper number 066077, ASAE Annual Meeting, American Society of Agricultural and Biological Engineers, St. Joseph, Michigan. .
doi: 10.13031/2013.21754
Patabang, D. (2012). Thermal characteristics and variation of rice husk briquettes with adhesivematerials:KarakteristikTermalBriketArangSekamPadidenganVariasiBahanPerekat: JurnalMekanikal. Vol 3 (2): 286- 293. Pryor, M. (1988).The International Briquetting Annual Report. Swedish International Development Agency (SIDA). Sweden. Shigley,J., Mischke C. R., Brown Jr. T. H. (2004). Standard Handbook of Machine Design, 3rd Edition.McGraw-Hill Professional, ISBN-13: 063-9785511038 ISBN-10: 0071441646, 1200 pages.
Yaman, S., Sahan M.,Haykiri-Acma H., Sesen, K.,Kucukbayrak, S.(2001). Fuel Briquettes from Biomass-Lignite Blends. Fuel Processing Technology, 72: 1-8.
Wessapan, T., T. N. Somsuk and T. Borirak (2010).Design and Development of a Compact Screw-Press Biomass Briquetting Machine for Productivity Improvement and Cost Reduction. The First TSME International Conference on Mechanical Engineering 20-22 October, UbonRatchathani. Thailand..
Zhang, Y., A.E. Ghaly and B. Li (2012).Physical properties of rice residues as affected by variety and climatic and cultivation conditions in three continents. Am. J. Applied Sci., 9: 1757-1768. | ||
|
Statistics Article View: 558 PDF Download: 2,515 |
||
