MANUFACTURED AND EVALUATION OF CORN SHELLER SUITABLE FOR EGYPTIAN FARMER | ||
| Misr Journal of Agricultural Engineering | ||
| Article 1, Volume 33, Issue 2, April 2016, Pages 319-334 PDF (394.65 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/mjae.2016.97799 | ||
| Author | ||
| M. A. A. Mady | ||
| Ag. Eng. Department, Faculty of Agriculture, Suez Canal University, 41522 Ismailia, Egypt. | ||
| Abstract | ||
| A power-operated corn sheller was manufactured to investigate the effect of corn moisture content, drum rotary speed on the percentage of damaged kernels, undamaged kernels, losses of kernels as well as shelling efficiency and machine productivity. The experiments were conducted at four levels of kernels moisture content of 12,2, 13.3, 14.5and 16 % and four drum rotary speeds of 220 , 280, 340 and 400 rpm ( 23.02, 29.31, 35.9 and 41.9 m/s). The results indicated that, increasing drum speed lead to increase each of damaged kernels, losses kernels and machine productivity. On the other side, increasing drum speed tends to decrease the undamaged kernels and machine efficiency. The least value of damaged kernels (1.5%) and the highest values of undamaged kernels (98.5%) and machine efficiency (96.3%) were obtained at moisture content of 13.3%. While increasing moisture content lead to increase the losses kernels and decrease machine productivity. | ||
| References | ||
|
Abd EL-Maksoud , M. Abd. ( 1996 ). Establishing and testing a racked Vertical disk corn Sheller. Misr J. Ag. Eng., 13 (1) 101 -121
Agriculture Extension ISSUE (2012), Ministry of Agriculture Cairo.
Ajav, E.A. and J. C. lgbeka ( 1995 ). Performance evaluation of a Nigerian maize Sheller using an international test code. J. Agric. Eng. For I. Dev. 2 ( 1 ): 1 – 8 .
Kumar, V. J. F. and S. Parvathi ( 1998 ). Ergonomic study of manually operated corn sellers .I. Ag. E. J. 7 ( 1 ): 37 _45.
Liao, k; M. R. Paulsen; and Reid J.F. ( 1994 ). Real – time detection of color and surface defects of corn kernels using machine vision .J. Ag. Eng. Res. 59 ( 4 ) : 263 – 271.
Metwalli, M. M. ,M. A. Helmy ,S.M. Gomaa and M.E Badawy (1995a). Evaluation of same parameters affecting corn Sheller performance. Misr J. Ag. Eng. 12 ( 2 ): 439-455.
Metwalli, M.M. ,M.A. Helmy ,S.M. Gomaa and M.E Badawy(1995b ). Performance evaluation of same maize shelling machinery. Misr J. Ag. Eng. 12( 2 ) 420-438.
Ng , H. F; W. F. Wilcke; R. V. Morey ; J.P. Lang (1998). Machine vision evaluation of corn kernel mechanical and mold damage. Trans. Of the ASAE 41 (2): 415- 420.
Vishwanatha, B.T. ( 2005 ). An economic analysis of threshing of maize crop in Karnataka : A comparative study of mechanical v/s traditional threshing methods. MS. Department of Agriculture economics, college of Agricultural, Dharwad, University of Agricultural Sciences.
Zaalouk, A. K. (2013). Development a packed vertical disk corn Sheller for rural dweller Misr j. Ag. Eng., 30(4): 1023-1040. | ||
|
Statistics Article View: 198 PDF Download: 317 |
||
