DEVELOPMENT OF A MOWER FOR GRASS HARVESTING | ||
| Misr Journal of Agricultural Engineering | ||
| Article 1, Volume 30, Issue 4, October 2013, Pages 907-924 PDF (481.5 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/mjae.2013.99560 | ||
| Author | ||
| M. M. Atallah | ||
| Researcher, Ag. Eng. Res. Inst., Ag. Res. Center, Dokki, Giza, Egypt. | ||
| Abstract | ||
| The aim of this study is to development, construct and test a mower for small-scale in grass harvesting. The mower consisted of the main components including the frame, cutting mechanism, drive drum, gauge rollers, electrical motor, power transmission and handle. The results can be summarized as follows: the maximum machine productivity of 599.4 m2/h (0.143 fed./h) was obtained with forward speed of 2.16 km/h, cutting height of 2 cm and cutting speed of 6 m/s. Meanwhile, the minimum machine-productivity of 216.9 m2/h (0.052 fed/h) was obtained with forward speed of 0.84 km/h, cutting height of 5 cm and cutting speed of 4.1 m/s. The maximum cutting-efficiency of 98.8 % was obtained with forward speed of 0.84 km/h, cutting height of 2 cm and cutting speed of 6 m/s. The maximum power requirements of 0.70 kW was obtained with forward speed of 2.16 km/h, cutting height of 5 cm and cutting speed of 6 m/s. Meanwhile, the maximum specific energy of 11.27 kW.h/fed. was obtained with forward speed of 0.84 km/h, cutting height of 5 cm and cutting speed of 6 m/s. The experimental results revealed that the use of the developed grass-mower maximized cutting efficiency and minimized energy. The operational cost and cost of production were 11.5 L.E./h and 193.3 L.E./fed. respectively, was obtained with forward speed of 0.84 km/h. | ||
| References | ||
|
Awady, M. N., 1978, Tractors and farm machines, in Arabic, text. Col. Ag., A. Shams U.: 164-167.
Celik, A., 2006, Design and operating characteristics of a push type cutter bar mower, Canadian Biosystems Engineering, 48: 23-27.
Chattopadhyay, P. S.; Ranabir M. and Mahapatra, M., 2010, Performance evaluation of different machines on harvesting baffle grass. Journal of Interacademicia, 14: 186-190.
Jagielski, K. and Treder, W., 1998, Operating tests on orchard mowers, Zeszyty Naukowe Instytutu Sadownictwa Kwiaciarstwa Skierniewicach; 5: 65-81
Keepin, M. 2003, Look sharp. Leisure Manager. 21: 14-15.
Kemper, S.; Lang, T. and Frerichs, L., 2012, Analysis of the overlaying cut in rotary mowers. Landtechnik;67: 346-349.
Kumhala, F., 1998, Comparison of mowing machines used by agricultural machinery for small scale arming. Scientia Agriculturae Bohemica; 29: 259-267.
Kumhala, F.; Kroulik, M.; Masek, J.; Prosek, V. 2003, Development and testing of two methods for the measurement of the mowing machine feed rate. Plant, Soil and Environment; 2003. 49: 11, 519-524. 8 ref.
Magar, A. P.; Abuj, M. D.; Bastewad, T. B.; Adagale, P. V. 2010, Performance evaluation of grass cutter. International Journal of Agricultural Engineering; 2010. 3: 1, 153-155. 1 ref.
Piccarolo, P. 2012, Cutting grass: lawns and sports surfaces. Mondo Macchina; 2012. 21: 3/4, 52-55. | ||
|
Statistics Article View: 254 PDF Download: 291 |
||
