DEVELOPMENT OF GRINDING MACHINE SUTABLE FOR MANGO KERNEL | ||
| Misr Journal of Agricultural Engineering | ||
| Article 2, Volume 30, Issue 4, October 2013, Pages 925-944 PDF (749.8 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/mjae.2013.99562 | ||
| Authors | ||
| Ahmed EL-RAIE Suliman1; M. S. Omran2; M. A. Baiomy3; H. M. Ahmed4 | ||
| 1Prof, Ag. Eng. Dept., Fac. of Ag., Cairo Univ., Egypt. | ||
| 2Assoc. Prof., Ag. Eng. Dept., Fac. of Ag., Cairo Univ., Egypt. | ||
| 3Chief Res, Tech. Trans. Res. Dept., Ag. Eng. Res. Inst., Ag. Res. Center, Dokki, Giza, Egypt. | ||
| 4Agric. Eng., Tech. Trans. Dept., Ag. Eng. Res. Inst., Ag. Res. Center, Dokki, Giza, Egypt. | ||
| Abstract | ||
| The grinding process of agricultural wastes is important process to produce pre-materials for many uses. The aim of this study was develop and evaluate the grinding machine performance suitable for mango kernels as hard wastes. The average of mango kernel per pulp ratio was about 74.5%. The main dimensions were 53.88±7.43, 20.42±3.21 and 10.98±1.89 mm at length, width and thickness, respectively, The spherisity was (75.5±20.39 %), geometric (4.1±1.25mm) and arithmetic (28.43±3.01mm) diameters, surface area (56.9±34.3mm2), coefficient of frictions on galvanized, iron black painted and iron sheet were about 0.649, 0.577 and 0.675 respectively, hardness (444.64±118.24N) and shear strength (224.62±98.65N). The studied factories include feeding quantity "F" of 10, 15 and 20kg, drum speeds "S" at 1500, 2000, 2500 and 3000 rpm (28.26, 37.68, 47.10 and 56.52 m/s) and knives number "N" of 24, 36 and 48 knives. The grinding machine performance was estimated by determine the product quality (grinding residual distribution and mean weight diameters "MWD") and the machine performance (machine productivity, power consumed and energy requirement). From the obtained results it can be concluded that the grinding machine can be manufactured and used to grinding the local mango kernel at the feeding quantity of 20 kg, drum speed of 2000 rpm and knives number of 36 to obtain the homogeneous size distribution with less "CV" of 4.3, 11.22 and 12.26% respectively and at these studied parameters the MWD machine productivity, power consumed and specific energy requirement are 1.309mm, 2.94Mg/h, 3.60kW and 1.22kW.h/Mg respectively. The developed grinding machine which manufacture from a locally materials can be tested to grind many solid wastes to increase the developed grinding machine reliability. | ||
| References | ||
|
Aly, L.H.M. and Dimian, T.F. (1988). Equipments of animal production mechanization. BaghdadUniv. 231 - 259.
AOAC (2000). Official methods of analysis of AOAC international .17th Ed. official method of analysis, INC, suite 500 William Horwitz, 20877-2417 USA., pp 1-26.
Aregheor, E.M. (1998). A review of implications of anti-quality and toxic components in unconventional feedstuffs for use in intensive animal production in Nigeria. Veterinary and Human Toxicology. 40 (1): 35-39.
ASAE Standards (2001). ASAE S 368. Compression test of food material of convex shape, st. Joseph, MI: ASAE.
Ashoush, I.S. and Gad-Allah, M.G.E. (2011). Utilization of mango peels and seed kernels powders as sources of phyto-chemicals in biscuit. World J. of Dairy & Food Sci., 6 (1): 35-42.
Campbell, G.M. (2007). Roller milling of wheat. In Salman, A.D. Ghadiri, M. and Hounslow, M.J. (eds.), Handbook of Particle Breakage, (Oxford, UK: Elsevier), 391–428.
Central Administration foe Agricultural Economics and statistics, Ministry Agricultural, Egypt, 2010
Deaton. U.W.; Lott, B.D. and Simmons, J.D. (1989). Hammer mill versus roller mill grinding of corn for commercial layers. Poultry. Sci., 68: 1342-1344.
Diarra, S.S.; Saleh, B.; Kwari; Usman, B.A. and Igwebuike, J.U. (2011). Evaluation of boiled mango kernel meal as energy source by broiler chickens in the semi-arid zone of Nigeria. I.J.S.N., Vol. 2 (2): 270- 274.
El-Ashhab, A.O.M; Hemeda, B.E.; Radwan, H.A. and Deraz, T.A.A. (2003). Minimizing energy required to grind some grains for feed rations. The 9th Conf. of Egyptian Soc. of Nutrition and Feeds. 1325-1331.
El-Dorghamy, A. (2010). Biogas potential in Egypt. Tri-Ocean Carbon & Renewables., P. 1-25.
El-Hadidi, Y.M.; Amin, E.A. and Hegazy, K.E. (1997). Performance evaluation for some types of crushing machines used in poultry farms. Misr. J. Ag. Eng., 14(3): 285 – 298.
FAO (2006). Small mills in Africa selection, installation and operation of equipment. At the web page: http://www.fao.org/faostat/.
Fife, T.D.; Bohnert, R.M. and Bowman, J. (2010). Factors to consider when feeding grain supplement to beef cattle. Cattle producers library, 332-1: 332-4.
Hall, C.W. and Davis, D.C. (1979). Processing equipment for agricultural products. 2nd Ed. AVI pub. INC., Ch. 1, 1 - 31.
Ibrahim, M.K. (1982). Wet milling of wheat grain. M. Sc. Thesis Fac. of Agric., Mansoura Univ., Egypt.
Kim, H.; Moon, J.Y.; Kim, H.; Lee, D.S.; Cho, M. and Cho, H.K. (2010). Antioxaidant and antiproliferative activities of mango (Mangifera indica) flesh and peel. Food Chem.,121: 429-436.
Mahmoued, H.A. (2005). Biochemical evaluation of some agricultural by-products and their application in animal feeds. Ph. D., Thesis. Agric. Sci. Det. Ain Shams Univ. 70-78p
Maisuthisakul, P. and Gordon, M.H. (2009). Antioxidant and tyrosinase inhibitory activity of mango seed kernel product. Food Chemistry 117: 332-341.
McCabe, W.L.; Smith, J.C. and Harriott, P. (1993). Unit operations of chemical engineering. Mechanical separation, Me Graw-Hill, Inc. New York, USA.
Ministry of Agriculture and Land Reclamation, Economic Affalrs Sector (EAS) (2012). Study of the indicators agricultural statistics Egypt.
Mohsenin, N. (1998). Physical properties of plant and animal materials. Gordon and Breach Pub. Inc., Amsterdam, Netherlands.
Naveen, Z.; Prasad, J.R. and Rao, Z.P. (2006). Chemical composition and in vitro dry matter digestibility of some fruit wastes. Tamilnadu J. Vet. Anim. Sci., 2, 229-233.
RNAM (1983). RNAM test codes and procedures for farm machinery. Technical Series No. 12.
Seyed M.A.R. and M. Elnaz (2006). Some physical properties of the watermelon seeds. African Journal of Agricultural Research Vol. 1 (3), pp. 065-069.
Soong, Y. and Barlow, P.J. (2006). Quantification of gallic acid and ellagic acid from Longan (Dimocaepus longan Lour) seed and mango (Mangifera indica L.) kernel and their effects on antioxidant activity. Food Chemistry, 97: 524-530.
Sun, Y. (2002). Enzymatic hydrolysis of rye straw and bermudagrass for ethanol production. PhD diss. Raleigh, N.C.: North CarolinaStateUniversity, Department of Biological and Agricultural Engineering. | ||
|
Statistics Article View: 275 PDF Download: 658 |
||
