RICE BRAN PELLETS PRODUCTION BY USING AN EXPELLER MACHINE | ||
| Misr Journal of Agricultural Engineering | ||
| Article 14, Volume 28, Issue 4, October 2011, Pages 975-998 PDF (622.2 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/mjae.2011.102612 | ||
| Authors | ||
| M. I. Shoughy1; A. A. EL-Keway2; Y. T. Hendawy2 | ||
| 1Sen. Res., Ag. Eng. Res. Inst., Ag. Res. Center, Dokki, Giza, Egypt. | ||
| 2Res., Ag. Eng. Res. Inst., Ag. Res. Center, Dokki, Giza, Egypt. | ||
| Abstract | ||
| Development and testing an expeller machine for oil extraction as a dual purpose for forming rice bran pellets to maximize the oil extraction rate during solvent extraction was carried out. Four screw revolving speed (0.262, 0.524, 0.786 and 1.05 m/s), three die hole diameter (6, 8 and 10 mm) as well as three levels of moisture content (11.1, 14.2 and 16.1%, w.b.) of two rice bran components (white and dark bran) during extrusion process were used to investigate their effect on the machine performance and the resulting extrudate properties. The results revealed that, the extruder productivity of white bran at the same die hole diameter (10 mm) was increased by 30.3, 35.4 and 25.8%, specific energy requirement by 64.1, 56.7 and 70.4%, durability by 31.7, 23.5 and 18.9%, hardness by 60.1, 84.4 and 74.5% when screw speed increased from 0.262 to 1.05m/s with bran moisture content 11.1, 14.2 and 16.1%, respectively. While, at the same screw speed (0.786 m/s) and die hole diameter (6 mm), the productivity was decreased by 10.2% and hardness by 24.3%, while energy requirement increased by 24.9% and durability by 10.5% with increasing moisture content. The same trend was noticed with various operating parameters of dark bran, but the productivity, pellets durability and hardness was higher value by about 12%, 12.3 and 65.2% than the values of white bran, while the energy requirement was lower value by 8%. The regression equations were found and can be used to predict the change of extruder performance and quality of bran pellets under different operating conditions. | ||
| References | ||
|
Abhay Sah, B. K.; D. Agrawal and L. S. Shukla (1983). Influence of pellet size on extraction rate of rice bran oil. JAOCS, 60(2): 465.
Al-Ashry, A.S. (1999). Development of a simple machine for expression of some oilseeds. Ph. D. Thesis Faculty of Agric. Minofia Univ., Egypt.
AOAC International (2003). Official methods of analysis of AOAC international (17th ed.). Gaithersburg, Massachusetts, USA: AOAC International.
ASAE Standard (2004). American Society of Agricultural Engineers – Standards, Engineering Practices, and Data. ASAE: St. Joseph, MI
Chevanan, N.; K. Muthukumarappan; K.A. Rosentrater and J. L. Julson (2007). Effect of die dimensions on extrusion processing parameters and properties of DDGS-based aquaculture feed. Cereal Chemistry, 84(4), 389–398.
Chevanan N.; K. A. Rosentrater and K. Muthukumarappan (2010). Effects of processing conditions on single screw extrusion of feed ingredients containing DDGS. Food Bioprocess Technology, 3:111–120.
Kaliyan N. and R.V. Morey (2007). Strategies to improve durability of switch grass briquettes. An ASABE paper number: 076182.
Kim, C.J.; S. M. Byum; H. S. Cheigh and T. w. Kwon (1987). Comparison of solvent extraction characteristics of rice bran pretreated by hot air drying, steam cooking and extrusion. JAOCS, 64(4): 514 -519.
Lam, C. D. and R. A. Flores (2003). Effect of particle size and moisture content on viscosity of fish feed. Cereal Chem, 80:20-24.
Matouk, A M.; M. M. El-Koly; M. El-Sadawy and Y. T. Hendawy (2009). Rice bran oil extraction using an expeller machine. Misr J. Ag. Eng., 26(1): 324-342.
Motthew, T. B. (2009). Stabilized rice bran. Animal Nutrition Division for NutraCea. Mbutler@nutracea.com. Item number: 120474490207.
Orthoefer, F. T.(2005). Rice Bran Oil. Bailey’s Industrial Oil and Fat Products, Sixth Edition, Six Volume Set. Edited by Fereidoo Shahidi. Copyright, John Wiley and Sons, Inc.
Shukla C. Y.; K. Muthukumarappan and J. L Julso. (2005). Effect of single screw extruder die temperature, amount of distillers dried grains with solubles (DDGS) and initial moisture content on extrudates. Cereal Chemistry: 82(1), 34–37.
Sokhansanj, S., S. Mani, X. Bi, P. Zaini and L. Tabil (2005). Binderless pelletization of biomass. Presented at the ASAE Annual International Meeting, July 17-20, 2005, Tampa, FL. ASAE Paper No. 056061. ASAE, 2950 Niles Road, St. Joseph, MI49085-9659USA.
Tangprawat, C. (2006). Determination of total lipid content and Gama-oryzanol in rice bran. M Sc. Thesis, Faculty of graduate studies. Mahidol University, Thailand.
Takeshita, Y. (1984). Model planning of overseas rice bran oil mill. Transactions of the KokushikanUniv. Dept. of Engineering. 17: 80-89.
Tumuluru, J. S.; L. Tabil; A. Opoku; M. R. Mosqueda and O. Fadeyi (2010). Effect of process variables on the quality characteristics of pelleted wheat distiller’s dried grains with soluble. Biosystems Engineering, 105(4): 466–475.
Uppal, S. L. (1984). Electricalpower. Published by 2-B Nath Market, Nai Srak, New Delhi, India.
Yasuhiko, T. and F. Iwata (1988). Recent technical advances in rice bran oil processing (II). About refining process. Transactions of the KokushikanUniv. Faculty of Engineering, 21: 118 - 124. | ||
|
Statistics Article View: 269 PDF Download: 921 |
||
