EVALUATION OF MECHANICAL HARVESTING OF OLIVE TREES IN SOME DESERT RIGONS | ||
| Misr Journal of Agricultural Engineering | ||
| Article 8, Volume 27, Issue 3, July 2010, Pages 886-902 PDF (854.73 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/mjae.2010.105750 | ||
| Authors | ||
| M.M. Morad1; M.Kh. Afify1; A.S. El-Kot2; Kh.M. Zaky3 | ||
| 1Prof. of Agric. Eng. Dep., Fac. Agric. Zagazig Univ., Egypt. | ||
| 2Associate prof. of Agric. Eng., Soil Conservation Dep., D.R.C, Egypt. | ||
| 3Agronomist, South Sinai Research Station. D.R.C. , Egypt. | ||
| Abstract | ||
| A comb harvesting machine was locally manufactured from low cost, local material to be suitable for olive harvesting. Performance evaluation of the manufactured machine was carried out in terms of harvesting time and comb rotating velocity comparing with four traditional methods of olive harvesting (vibrating comb, shaking the brunches, beating the brunches and climbing the trees using ladder). Three different olive trees varieties (Toffahey, Agezzey and Picual) were harvested by the above mentioned harvesting methods. The results showed that quality percentages of olive were 95.5, 75, 85, 85, and 85% for the manufactured comb harvesting machine, vibrating comb, shaking the brunches, beating the brunches and climbing the trees using ladder respectively. The energy requirements values were 9.267, 14.49, 122.9, 122.9 and 122.9kW.h/ton for the same harvesting methods. While the costs values for the harvesting operation were 95.1, 322.36, 2375, 2375 and 2375LE/ton under the same harvesting methods. The best results were achieved with the use of the manufactured comb harvesting machine at comb rotating velocity of 30 rpm during the third harvesting time. | ||
| References | ||
|
Abdel-Maksoud, S. E.; A. I. Hashish, M. S. El-Shal and S. E. Bader, (1992). A study on selecting the proper system for olive harvesting. Misr J. Ag. Eng., 1992; 9(2): 172-178.
Buyanov, A. I. And B. A. Voronyuk, (1985). Physical and mechanical properties of planting, fertilizers and soils. 111-123, Amerind publishing co. PVT. TD. New Delhi.
Colrio, G.; V. Iannicelli, and L. Ragni, (1997). Compressed air machines to facilitate harvesting olives. Informatore-Agrario. 1997, 53: 44, 53-57.
Embaby, A. T., (1985). A comparison of the different mechanization systems for cereal crop production. Unpubl. M. Sc. Thesis. Agric. Eng., Cairo Univ.
Morales-Bernardino, j., and C. Garica-Ortiz-Civantos, (2003). The harvest of olive and its influence on the quality of the oil. Agricultura,-Revista-Agropecuaria. 2003; 72 (857): 840-845.
Ravetii, L. M. (2008). Evaluation of new olive mechanical harvesting technologies in Australia. Acta-Horticulture, 2008; (791(Vol1)): 387-392.
Vieri, M. (2002). Olive picking testes with a shaker module and a harvesting umbrella, mounted on a rotating platform excavator. Advances- in-Horticultural-Science. 2002; 16(3/4): 240-245.
Visco, T.; M. Molfese, M. Cipolletti, R. Corradetti and A. Tombesi, (2008). The influence of vibration applied to the trunk and the branches of different size olive trees on the efficiency of mechanical harvesting. Acta-Horticulture, 2008; (791(Vol 1)): 435-438.
Ministry of Agriculture Company and Building Agricultural Research Economics Bulletin, (2008). | ||
|
Statistics Article View: 95 PDF Download: 325 |
||
