Recent advances in the application of plasma in textile finishing (A Review) | ||
| Journal of Textiles, Coloration and Polymer Science | ||
| Article 3, Volume 18, Issue 1, June 2021, Pages 33-43 PDF (1.96 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/jtcps.2021.67798.1050 | ||
| Authors | ||
| Esraa El-Sayed1; Ahmed G. Hassabo* 2 | ||
| 1Textile Printing, Dyeing and Finishing Department, Faculty of Applied Arts, Benha University, Benha, Egypt | ||
| 2National Research Centre (NRC), Textile Industries Research Division (TIRD), Pre-treatment and Finishing of Cellulose based Textiles Department (PFCFD), El-Behouth St. (former El-Tahrir str.), Dokki, P.O. 12622, Giza, Egypt | ||
| Abstract | ||
| The textile industry is seeking innovative manufacturing technology to increase the quality of the fabric, and society needs modern environmental finishing techniques, such as using plasma Treatment as atmospheric-pressure dielectric barrier discharge (APDBD) corona discharge at atmospheric pressure (CDAP) which are gaining popularity in the textile industry due to their many advantages over traditional wet processing methods the textiles industry is gaining in popularity. The initiation of plasma by air or conventional industrial gases, such as hydrogen H2, N2 and oxygen O2 at ambient pressures, may be accomplished. Plasm introduces usable surface groups to provide properties such as antibacterial, UV, flame retardant and antistatic that are used in various fabrics such as cotton, linen, polyester, and surface fabrics after plasma therapy. | ||
| Keywords | ||
| plasma treatment; Environmental impact; Atmospheric Pressure; antibacterial; Flame retardant; UV protection; Antistatic | ||
|
Statistics Article View: 2,120 PDF Download: 1,915 |
||
