Adaptive MPPT of Water Photovoltaic Pumping System Based on Vector Controlled Induction Motor Drives | ||
| Journal of Advanced Engineering Trends | ||
| Article 19, Volume 41, Issue 2, July 2021, Pages 261-274 PDF (1.54 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/jaet.2021.47871.1065 | ||
| Authors | ||
| Montaser Abd El Sattar* 1; Kenawy Ahmed2; Alaa AboZied3; Ahmed Abdelhamid Zaki Diab4 | ||
| 1Department of Electrical Engineering, Faculty of Engineering, South Valley University, Qena 83523, Egypt. | ||
| 2Electrical Engineering Department, Faculty of Engineering, Minia University, Minia 61111, Egypt | ||
| 3Electrical Engineering Department, Faculty of Engineering, Al-Azhar University, Qena, Egypt | ||
| 4Faculty of Engineering Minia University | ||
| Abstract | ||
| In this paper, the maximum power point (MPP) of photovoltaic (PV) for vector control of an induction motor (IM) driving water is achieved. This paper implements and analyzes the maximum power point tracking (MPPT) in one stage. The vector control scheme for an induction motor has been introduced to improve the reliability of the PV system. Furthermore, the Adaptive incremental conductance (AINC) method has been applied to track the maximum power point (MPP) of the PV plant. Additionally, the principles of vector control of an induction motor are used for voltage source inverter fed induction motor pumping system. The control scheme is simulated and validated considering the environmental conditions such as solar radiation and temperature. The scheme has been validated through MATLAB/SIMULINK. The obtained results and analysis authorize that, the proposed control system is accurate and effective. In addition, the results show that, the induction motor drive is stable during dynamic and steady-state conditions. | ||
| Keywords | ||
| Photovoltaic Pumping System; MPPT; Incremental Conductance Method; AC drives; Induction Motors Drives | ||
|
Supplementary Files
|
||
|
Statistics Article View: 198 PDF Download: 369 |
||
