SCALING OF EARTHQUAKE GROUND MOTION RECORDS FOR SEISMIC ANALYSIS AND DESIGN OF BRIDGES | ||
| Journal of the Egyptian Society of Engineers | ||
| Article 7, Volume 53, Issue 2, September 2014, Pages 18-2 PDF (901.02 K) | ||
| Document Type: Scientific and technological | ||
| Author | ||
| Nevine A. Markous* | ||
| Graduate student, Department of Structural Engineering, Faculty of Engineering, Cairo University | ||
| Abstract | ||
| There are many options to define the seismic input for structural analysis. Natural recordings are considered as the most attractive option. But when insufficient - previously recorded - earthquake accelerograms are available or when they do not belong to the same seismic environment for a particular case study, it is common in practice to select other remotely recorded ground motions – or artificially generated ones - and ‘scale’ them considering number of criteria to get an unbiased estimation of seismic demand. The study presented in this paper aims to investigate the efficiency of a proposed scaling scheme for ground records, which is based on matching the code design response spectrum at the fundamental period of the bridge, (Sd (T1)), or minimizing the error between this spectrum and the record-specific response spectrum at different control periods associated with the main vibration modes governing the response of the bridge. Scaling records to match Sd (T1), successfully predicts the response of the bridge (with a relatively limited variation in results from different records) even when using general ground records and not site-specific actual records. The study is accomplished by applying the proposed scaling scheme to some selected continuous bridge systems commonly encountered in Egypt. These bridges feature four equal spans with lengths of 25, 45 and 65 m investigated to represent short, medium and long span bridges, respectively. A set of twenty three international ground motion records were chosen from worldwide available strong motion database to assess the efficiency of the proposed scaling technique. | ||
|
Supplementary Files
|
||
| References | ||
|
[1] Evangelos I. Katsanos, Anastasios G. Sextos, George D. Manolis. Selection of earthquake ground motion records: A state-of-the-arte view from a structural engineering perspective. Soil Dynamics and Earthquake Engineering. 2010; 30: 157-169.
[2] Eurocode 8: “Design of structures for earthquake resistance”. Part 1: “general rules, seismic actions and rules for buildings”, Final draft prEN 1998, European Committee for Standardization, Brussels. EC8-1 (109) CEN, Part 2: "bridges” EC8-2; 2003
[3] American Society of Civil Engineers, Minimum design loads for buildings and other structures. ASCE07-05; 2006.
[4] American Association of State Highway and Transportation Officials (AASHTO). Load and Resistance Factor Design (LRFD) Bridge Design Specifications, 5th ed., Washington,D.C 20001; 2010.
[5] American Society of Civil Engineers. Seismic analysis of safety-related nuclear structures and commentary. ASCE standard no. 004-98; 2000.
[6] Building Seismic Safety Council for the Federal Emergency Management Agency. FEMA 368. Recommended provisions for seismic regulations for new buildings and other structures. Washington, DC, 2001; 2001
[7] New Zealand Code and supplement Standards. NZS 1170.5.Structural design actions, Part5: earthquake actions. NewZealand. Wellington; 2004.
[8] Ordinanza del Presidente del Consiglio dei Ministri (OPCM) n. 3274. Norme tecniche per il progetto, la valutazione e l’adeguamento sismico degli edifici. Gazzetta Ufficiale della Repubblica Italiana;2003.
[9] Hellenic Antiseismic Code (EAK).Ministry of Public Works, Athens; 2000.
[10] Recommended lateral force requirements and commentary, seismology committee, structure engineers association in California,(SEAOC); 1996 sixth edition and 1999 seventh edition.
[11] Seismic evaluation and retrofit of concrete buildings, (ATC-40). California seismic safty Commission SSC 96-01; 1996.
[12] Shome N, Cornell C, Bazzurro P, Carballo J. Earthquake, records, and nonlinear responses. Earthquake Spectra. (1998); Vol. 14 (3):469 –500.
[13] Y. C. Kurama and K. T. Farrow. Ground Motion Scaling Methods for Different Site Conditions and Structure Characteristics. Earthquake Engineering and Structural Dynamics. 2003; 32: 2425-2450.
[14] Sameh S.F. Mehanny. A Broad-Range Power-Law form Scalar-Based Seismic Intensity Measure. Engineering Structures. 2009; 31: 1354-1368
[15] Baker J.W., Cornell C.A. Correlation of Response Spectral Values for Multi- Component Ground Motions. Bulletin of the Seismological Society of America. 2006; Vol. 96 (1): 215-227.
[16] Mourad M. Bakhoum. Effect of Vertical Acceleration on the Seismic Design of Bridges. Helwan University Scientific Journal. Egypt, April 2003.
[17] The Egyptian Code for Loads on structures. (ECP201). Egypt; 2008.
[18] Nevine A. Markous. Scaling of Earthquake Ground Motion Records for Seismic Analysis and Design of Bridges. [M.sc. Thesis]. Cairo University; 2011.
[19] The Pacific Earthquake Engineering Research Center ground motion database.(PEER)[Internet] 2010. Available from: http://peer.berkeley.edu/peer_ground_motion_database.
[20] Jack W. Baker. Measuring Bias in Structural Response Caused by Ground Motion Scaling.Proceedings of the 8th Pacific Conference on Earthquake Engineering, 2007 December 5-7, paper No 056.
| ||
|
Statistics Article View: 102 PDF Download: 215 |
||
