EVALUATION OF SETTLEABLE SOLIDS REMOVAL METHODS IN RECIRCULATING AQUACULTURE SYSTEM | ||
| Misr Journal of Agricultural Engineering | ||
| Article 6, Volume 40, Issue 1, January 2023, Pages 75-88 PDF (1.02 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/mjae.2022.173696.1089 | ||
| Authors | ||
| Dena Z. El-Hashash1; Samir A. Ali2; Taha H. Ashour2; Elsayed G. Khater* 3 | ||
| 1M.Sc. Stud., of Ag. Eng., Fac. of Ag., Benha U., Egypt. | ||
| 2Prof. of Ag. Eng., Fac. of Ag., Benha U., Egypt. | ||
| 3Assoc. Prof. of Ag. Eng., Fac. of Ag., Benha U., Egypt. | ||
| Abstract | ||
| The main aim of this work is to study the effect of using different methods of settling solids removal for recirculating aquaculture system to improve the water quality. To achieve that, the effects of water flow rates (0.05, 0.07 and 0.1 m3 min-1), inlet diameters (32, 50 and 60 mm) and outlet diameters (32, 50 and 60 mm) for hydrocyclone, also different distance at the inlet of settling tank (4.0, 8.0 12.0 and 16.0 m from the inlet) and retention times (4.0, 6.0 and 8.0 h) for settling tank on settleable solids removed and efficiency were studied. The results indicate that, the settleable solids removed by using hydrocyclone decreased from 0.133 to 0.057, 0.102 to 0.089 and 0.106 to 0.085 kg m-3 with increasing flow rate, inlet and outlet diameters of hydrocyclone. The settleable solids removed by using settling tank increased from 0.052 to 0.058, 0.017 to 0.041, 0.011 to 0.025 and 0.006 to 0.011 kg m-3 after 4, 8, 12 and 16 m at the inlet tank, respectively, when the retention time increased from 4.0 to 8.0 h. The hydrocyclone efficiency in removing solids decreased from 48.5 to 33.7, 42.1 to 37.9 and 42.1 to 38.1% with increasing flow rate, inlet diameter and outlet diameter of hydrocyclone. The settling tank efficiency decreased from 27.37 to 2.70, 30.94 to 9.68 and 32.95 to 10.89 % at 4.0, 6.0 and 8.0 h of retention time, respectively, when the distance of the inlet of settling tank increased from 4.0 to 16 m. | ||
| Keywords | ||
| Settleable solids; Hydrocyclone; Settling tank; Efficiency; Flow rate | ||
| References | ||
|
Ahmed, N. and G.M. Turchini (2021). Recirculating aquaculture systems (RAS): Environmental solution and climate change adaptation. Journal of Cleaner Production. 297: 126604.
Andoh, R.Y.G. and A.J. Saul (2003). The use of hydrodynamic vortex separators and screening systems to improve water quality. Water Science and Technology 47(4), 175–183.
APHA (1998). Standard Methods for Examination of Water and Wastewater, American Public Health Association, American Water Works Association, Water Pollution Control Federation Washington, DC.
Azaria, S. and J. van Rijn (2018). Off-flavor compounds in recirculating aquaculture systems (RAS): Production and removal processes. Aquacultural Engineering. 83: 57–64.
Badiola, M., O.C. Basurko, R. Piedrahita, P. Hundley and D. Mendiola (2018). Energy use in Recirculating Aquaculture Systems (RAS): A review. Aquacultural Engineering. 81: 57–70.
Cripps, S. and A. Bergheim (2000). Solids management and removal for intensive land-based aquaculture production systems. Aquacultural Engineering, 22 (1 – 2): 33 – 56.
Khater, E.G. (2012). Simulation model for design and management of water recirculating systems in aquaculture. Ph. D., Thesis, Fac. Agric., Moshtohor, Benha Univ., Egypt.
Khater, E.G., S.A. Ali, A.H. Bahnasawy and M.A. Awad (2011). Solids removal in a recirculating aquaculture system. Misr J. Ag. Eng., 28 (4): 1178 – 1196.
Lee, J. (2010). Separation performance of a low-pressure hydrocyclone for suspended solids in a recirculating aquaculture system. Fish Aquaculture Science. 13(2): 150-156.
Lee, J. (2015). Practical applications of low-pressure hydrocyclone (LPH) for feed waste and fecal solid removal in a recirculating aquaculture system. Aquacultural Engineering. 69: 37-42.
Libey, G.S. (1993). Evaluation of a drum filter for removal of solids from recirculating aquaculture system. In: Techniques for Modern Aquaculturre, Wang, J. K. (editors), Saint Joseph, Michigan, ASAE.
Merino, G.E., R.H. Piedrahita and D.E. Conklin (2007). Settling characteristics of solids settled in a recirculating system for California halibut (Paralichthys californicus) culture. Aquacultural Engineering, 37, 79 – 88.
Patterson, R. and K. Watts (2003). Micro-particles in recirculating aquaculture systems: microscopic examination of particles. Aquacultural Engineering, 28 (2): 115–130.
Rafiee G.R. and C.R. Saad (2008). Roles of natural zeolite (calinoptiolite) as a bed medium on growth and body composition of red tilapia (Oreochromis sp.) and lettuce (Lactuca sativa var longifolia) seedlings in a pisciponic system. Iranian Journal of Iranian Fisheries Science, 7(2), 47-58.
Stechey, D. and Y. Trudell (1990). Aquaculture wastewater treatment: Wastewater characterization and development of appropriate treatment technologies for the Ontario trout production industry. Reported prepard for Environmental Services. Water Resources, Ministry of the Environment. Queen’s Printer for Ontario.
Summerfelt, S.T., J. Davidson and M.B. Timmons (2000). Hydrodynamics in the ‘Cornell-type’ dual-drain tank. In: Libey, G.S., Timmons, M.B. (Eds.), The Third International Conference on Recirculating Aquaculture. 22 June–3 July, Virginia Polytechnic Institute and State University, Roanoke, VA, pp. 160–166.
Timmons, M.B. and J.M. Ebeling (2010). Recirculating aquaculture. Cayuga Aqua Ventures, Ithaca, NY.
Twarowska, J.G., P.W. Westerman and T.M. Losordo (1997). Water treatment and waste characterization evaluation of an intensive recirculating fish production system. Aquacultural Engineering, 16: 133 – 147.
Veerapen, J.P., B.J. Lowry and M.F.Colturier (2005). Design methodology for the swirl separator. Aquacultural Engineering 33, 21–45.
Vinci, B.J., S.T. Summerfelt, D.A.Creaser and K. Gilletted (2004). Design of partial water reuse systems at White River NFH for the production of Atlantic salmon smolt for restoration stocking. Aquacultural Engineering 32, 225–243.
Xiao, R., Y. Wei , D. An, D. Li, X. Ta, Y. Wu and Q. Ren (2019). A review on the research status and development trend of equipment in water treatment processes of recirculating aquaculture systems. Reviews in Aquaculture, 11: 863–895. | ||
|
Statistics Article View: 355 PDF Download: 381 |
||
