Recent studies for printing cotton/polyester blended fabrics with different techniques | ||
| Journal of Textiles, Coloration and Polymer Science | ||
| Volume 20, Issue 2, September 2023, Pages 255-263 PDF (876.11 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/jtcps.2023.220489.1193 | ||
| Authors | ||
| Ahmed G. Hassabo1; Fedaa Saad* 2; Bouthaina M. Hegazy3; Hala M. Elmorsy2; Nanees Gamal2; Aya Sediek2; Hanan Othman4 | ||
| 1National Research Centre (NRC), Textile Research and Technology Institute (TRTI), Pre-treatment and Finishing of Cellulose based Textiles Department (PFCTD), El-Behouth St. (former El-Tahrir str.), Dokki, P.O. 12622, Giza, Egypt | ||
| 2Benha University, Faculty of Applied Arts, Printing, Dyeing and Finishing Department, Benha, Egypt | ||
| 3Textile Printing, Dyeing and Finishing Department, Faculty of Applied Arts, Benha University, Benha, Egypt | ||
| 4Benha, Egypt | ||
| Abstract | ||
| APPLICATION of the paste containing the dyes to the required areas on the fabrics is designated as direct printing, consequently dyeing and steaming followed by washing to remove any residues. In pigment printing, the pigments and cured binder adhere to the fabric surface with the cured binder film. No further treatment is required. Direct printing is considered the most important printing. Fibers have been defined by the textile institute as units of matter which are characterized by fineness flexibility and a high ratio of length to thickness. Fibers are the basic unit from which all textile materials are made. Textile goods are manufactured from fibrous material which may be either of natural or man-made origin. | ||
| Keywords | ||
| Textile printing; cotton/polyester fabric; printing techniques | ||
|
Statistics Article View: 512 PDF Download: 481 |
||
