D., D., K., D., K., R. (2008). ENHANCEMENT OF WEAR RESISTANCE OF DIE STEEL BY DEEP CRYOGENIC TREATMENT. test, 13(13th International Conference on Applied Mechanics and Mechanical Engineering.), 146-158. doi: 10.21608/amme.2008.39684
DAS D.; DUTTA A. K.; RAY K. K.. "ENHANCEMENT OF WEAR RESISTANCE OF DIE STEEL BY DEEP CRYOGENIC TREATMENT". test, 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., 2008, 146-158. doi: 10.21608/amme.2008.39684
D., D., K., D., K., R. (2008). 'ENHANCEMENT OF WEAR RESISTANCE OF DIE STEEL BY DEEP CRYOGENIC TREATMENT', test, 13(13th International Conference on Applied Mechanics and Mechanical Engineering.), pp. 146-158. doi: 10.21608/amme.2008.39684
D., D., K., D., K., R. ENHANCEMENT OF WEAR RESISTANCE OF DIE STEEL BY DEEP CRYOGENIC TREATMENT. test, 2008; 13(13th International Conference on Applied Mechanics and Mechanical Engineering.): 146-158. doi: 10.21608/amme.2008.39684

ENHANCEMENT OF WEAR RESISTANCE OF DIE STEEL BY DEEP CRYOGENIC TREATMENT

The International Conference on Applied Mechanics and Mechanical Engineering
Article 99, Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., May 2008, Pages 146-158    PDF (2.16 M)
Document Type: Original Article
DOI: 10.21608/amme.2008.39684
Authors
DAS D.1; DUTTA A. K.2; RAY K. K.3
1Senior Lecturer, Department of Metallurgy and Materials Engineering, Bengal Engineering and Science University, Shibpur, Howrah - 711103, India.
2Professor, Department of Mechanical Engineering, Bengal Engineering and Science University, Shibpur, Howrah - 711103, India.
3Professor, Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur - 721302, India.
Abstract
ABSTRACT
A comparative study of the wear behavior of deep cryogenically treated vis-à-vis
conventionally treated AISI D2 steel has been made to critically examine the extent of
improvement in wear resistance of tool steels by cryotreatment. A series of experiments
have been done to determine dry sliding wear resistance together with examinations of
the worn surfaces and generated debris, characterization of the microstructures, and
measurement of the hardness values of the differently heat treated steels. The obtained
results unambiguously assist to infer that cryotreatment substantially improves wear
resistance of D2 steel, but the extent of improvement is a strong function of the test
load. These observations have been explained with appropriate identification of the
operative wear mechanisms at different test conditions. Microstructural
characterizations reveal that the improvement in hardness and wear resistance by
cryotreatment is due to near complete removal of soft retained austenite with
concurrent increase in the amount of secondary carbides and tempered martensite.
Keywords
Deep cryogenic treatment; AISI D2; Wear resistance; wear mechanisms; Microstructures
Statistics
Article View: 127
PDF Download: 203