Optical and electrical properties of plasma surface treated polymethylmethacrylate films | ||
| Arab Journal of Nuclear Sciences and Applications | ||
| Article 9, Volume 52, Issue 4, October 2019, Pages 83-92 PDF (1.01 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/ajnsa.2019.7116.1168 | ||
| Authors | ||
| Naglaa Mohammed El-Sayed* 1; omar farag farag2 | ||
| 1Faculty of Science, Zagazig University, Egypt | ||
| 2Zagazig University, Faculty of Science, Physics Department, Zagazig, Egypt | ||
| Abstract | ||
| Abstract In the present study, the optical and electrical properties of Polymethylmethacrylate (PMMA) films have been investigated under the effect of direct current (DC) glow discharge plasma. PMMA films have been prepared and treated with low-pressure DC glow discharge plasma at different plasma conditions; mainly various working gas and plasma treatment time. The optical and electrical properties of the treated PMMA samples were measured and compared to the untreated one. Nitrogen, argon, and nitrogen-argon mixture have been used as working gases. Plasma parameters, such as the electron density, the ion density, and electron temperature, were measured, at the position of the PMMA films, using Langmuir probe. The results reveal that, the optical properties of PMMA were found to be more sensitive to N2- plasma treatment than Ar and N2-Ar gas mixture. The optical energy gap showed a decreasing behavior with increasing the treatment time of N2 plasma however, the band tail width and the electrical resistivity increased. | ||
| Keywords | ||
| Keywords: Surface modification; refractive index; electrical conductivity; Glow discharge; PMMA | ||
|
Statistics Article View: 469 PDF Download: 496 |
||
