Aboelsayed, K., Mahfouz, O., Aboulwafa, O., Hafez, M. (2019). EFFECT OF LASER AND CHEMICAL SURFACE TREATMENT OF COBALT-CHROMIUM ALLOY ON ITS BOND STRENGTH WITH HEAT CURED ACRYLIC RESIN (COMPARATIVE LABORATORY STUDY). test, 44(2), 83-90. doi: 10.21608/adjalexu.2019.57369
Kamel M. Aboelsayed; Ossama A. Mahfouz; Omaima Aboulwafa; Mohamed A. Hafez. "EFFECT OF LASER AND CHEMICAL SURFACE TREATMENT OF COBALT-CHROMIUM ALLOY ON ITS BOND STRENGTH WITH HEAT CURED ACRYLIC RESIN (COMPARATIVE LABORATORY STUDY)". test, 44, 2, 2019, 83-90. doi: 10.21608/adjalexu.2019.57369
Aboelsayed, K., Mahfouz, O., Aboulwafa, O., Hafez, M. (2019). 'EFFECT OF LASER AND CHEMICAL SURFACE TREATMENT OF COBALT-CHROMIUM ALLOY ON ITS BOND STRENGTH WITH HEAT CURED ACRYLIC RESIN (COMPARATIVE LABORATORY STUDY)', test, 44(2), pp. 83-90. doi: 10.21608/adjalexu.2019.57369
Aboelsayed, K., Mahfouz, O., Aboulwafa, O., Hafez, M. EFFECT OF LASER AND CHEMICAL SURFACE TREATMENT OF COBALT-CHROMIUM ALLOY ON ITS BOND STRENGTH WITH HEAT CURED ACRYLIC RESIN (COMPARATIVE LABORATORY STUDY). test, 2019; 44(2): 83-90. doi: 10.21608/adjalexu.2019.57369

EFFECT OF LASER AND CHEMICAL SURFACE TREATMENT OF COBALT-CHROMIUM ALLOY ON ITS BOND STRENGTH WITH HEAT CURED ACRYLIC RESIN (COMPARATIVE LABORATORY STUDY)

Alexandria Dental Journal
Article 14, Volume 44, Issue 2, August 2019, Pages 83-90    PDF (348.11 K)
Document Type: Original Article
DOI: 10.21608/adjalexu.2019.57369
Authors
Kamel M. Aboelsayed* 1; Ossama A. Mahfouz2; Omaima Aboulwafa3; Mohamed A. Hafez4
1B.D.S. Removable Prosthodontics Department, Faculty of Dentistry, Alexandria University
2Professor in Removable Prosthodontics Department, Faculty of Dentistry, Alexandria University
3Professor in Pharmaceutical Chemistry Department, Faculty of pharmacy, Alexandria University
4Assistant professor in Laser Science and Interactions Department, National Institute of Laser Enhanced Science, Cairo University
Abstract
INTRODUCTION: Durability of the removable prostheses is dependent on strong adhesion between the metal framework and acrylic resin. Weak adhesion causes separation of the denture base from the metal framework. It was reported that Neodynium-doped yttrium aluminium garnet (Nd:YAG) laser surface treatment can be used to strengthen the bond between dental alloys and resins. Aryldiazonium salts have been used to create a strong chemical bond between dental alloys and polymers. OBJECTIVES: To evaluate and compare the effect of Nd:YAG laser surface treatment and Aryldiazonium salts of cobalt chromium (Co-Cr) alloy on its bond strength with heat cured acrylic resin. Also, to analyze the metal-resin interface at a high-resolution level after laser and Aryldiazonium salts surface treatments. MATERIALS AND METHODS: Ten healthy adult white Albino New Zealand rabbits, after creating two osseous defects in the right femur in each. The defects (upper and lower) were divided in to two groups according to the material used for filling: Group A (Control): in the upper defect, bone graft only was added in the lateral side of the right femur. Group B (Study): in the lower defect, MPM was added in the lateral side of the right femur. After 2 &8 weeks respectively postoperatively, sacrification of the rabbits was done. RESULTS: Data collected from histological results revealed that MPM enhanced bone formation where increased amount of new bone formation was observed in the study group in relation to the control group. At the end of the experimental period, the defect area was almost filled with mature bone which occupied a greater surface area in the study group. Histomorphometric analysis revealed that there was increase in the mean percentage of bone surface area in the study group in comparison to the control group. This increase was statistically significant in the 8 weeks period. CONCLUSIONS: The bond strength between heat cured acrylic resin and alloy can be increased by Aryldiazonium salts application and laser surface treatment
Keywords
dental prosthesis; Aryldiazonium salts; Nd:YAG laser; Co-Cr alloy; heat cured acrylic resin
References
  1. Jones JA, Spiro A, Miller DR, Garcia RI, Kressin NR. Need for Dental Care in Older Veterans: Assessment of PatientBased Measures. Journal of the American Geriatrics Society. 2002;50:163-8.
  2. Carr AB, Brown DT. McCracken's Removable Partial Prosthodontics. Twelfth ed.: Elsevier Health Sciences; 2011.
  3. Kumar A, Singh K, Sarin A, Sachdeva S, Singh S. Evaluation and assessment of bonding of heat cure acrylic resin to cobalt-chromium alloy: Old ideas employing newer concepts. European Journal of Prosthodontics. 2014;2:1-10.
  4. Ohkubo C, Watanabe I, Hosoi T, Okabe T. Shear bond strengths of polymethyl methacrylate to cast titanium and cobalt-chromium frameworks using five metal primers. The Journal of Prosthetic Dentistry. 2000;83:50-7.
  5. Dewan H, Chohan H, Gujjari AK. The Effect of Metal Primer on the Shear Bond Strength of Denture Base Resin to Base Metal Alloy after Electrolytic Etching and Laser Etching: An In Vitro Study. Journal of International Oral Health. 2015;7:100- 10.
  6. Sasaki M, Yasuda N, Mogi T, Ai M. Influence between metal and resin on the finishing line of cobalt-chromium denture. Part 3. Studies on finishing line structure. J Jpn Prosthodont Soc. 1994; 38:191-7.
  7. Zurasky JE, Duke ES. Improved adhesion of denture acrylic resins to base metal alloys. The Journal of Prosthetic Dentistry. 1987;57:520-4.
  8. Henriques B, Sampaio M, Buciumeanu M, Souza JCM, Gomes JR, Silva F, et al. Laser surface structuring of Ti6Al4V substrates for adhesion enhancement in Ti6Al4VPEEK joints. Materials Science and Engineering: C. 2017;79:177-84.
  9. Henriques B, Fabris D, Souza JCM, Silva FS, Carvalho Ó, Fredel MC, et al. Bond strength enhancement of zirconiaporcelain interfaces via Nd: YAG laser surface structuring. Journal of the Mechanical Behavior of Biomedical Materials. 2018;81:161-7.
  10. Maiman TH. Stimulated optical radiation in ruby. Nature. 1960;23:493-8.
  11. Li R, Ren Y, Han J. Effects of pulsed Nd: YAG laser irradiation on shear bond strength of composite resin bonded to porcelain. West China Journal of Stomatology. 2000;18:377-9.
  12. Murray AK, Attrill DC, Dickinson MR. The effects of XeCl laser etching of Ni-Cr alloy on bond strengths to composite resin: a comparison with sandblasting procedures. Dental Materials. 2005;21:538-44.
  13. Kim J-T, Cho S-A. The effects of laser etching on shear bond strength at the titanium ceramic interface. The Journal of Prosthetic Dentistry. 2009;101:101-6.
  14. Yilmaz A, Akyil MÅ, Hologlu B. The effect of metal primer application and Nd: YAG laser irradiation on the shearbond strength between polymethyl methacrylate and cobaltchromium alloy. Photomedicine and Laser Surgery. 2011;29:39-45.
  15. Matsuda Y, Yanagida H, Ide T, Matsumura H, Tanoue N. Bond strength of poly (methyl methacrylate) denture base material to cast titanium and cobalt-chromium alloy. Journal of Adhesive Dentistry. 2010;12:213-5.
  16. Al Jabbari YS, Zinelis S, Al Taweel SM, Nagy WW. The Effect of Artificial Aging on The Bond Strength of Heat-activated Acrylic Resin to Surface-treated Nickelchromium-beryllium Alloy. The Open Dentistry Journal. 2016;10:25-9.
  17. Alageel O, Abdallah M-N, Luo ZY, Del-Rio-Highsmith J, Cerruti M, Tamimi F. Bonding metals to poly (methyl methacrylate) using aryldiazonium salts. Dental Materials. 2014;31:105-14.
  18. Mahouche-Chergui S, Gam-Derouich S, Mangeney C, Chehimi MM. Aryl diazonium salts: a new class of coupling agents for bonding polymers, biomacromolecules and nanoparticles to surfaces. Chemical Society Reviews. 2011;40:4143-66.
  19. Aazad AM, Shetty P, Bhat S, Joseph M. Comparative evaluation of tensile bond strength of denture base resins to surface pretreated cobalt chromium base metal alloys--an in vitro study. Indian Journal of Dental Research: official publication of Indian Society for Dental Research. 2001;12:159-65.
  20. Abdo RM. The Effect of Bonding Agent on The Attachment of Acrylic Resin to Metallic Frameworks. Thesis submitted to the Faculty of Dentistry, Alexandria University 2005:51- 3.
  21. Leslie SA, Mitchell JC. Removing gold coating from SEM samples. Palaeontology. 2007;50:1459-61.
  22. Kawaguchi T, Shimizu H, Lassila LVJ, Vallittu PK, Takahashi Y. Effect of surface preparation on the bond strength of heat-polymerized denture base resin to commercially pure titanium and cobalt-chromium alloy. Dental Materials Journal. 2011;30:143-50.
  23. Ikeda T, Wakabayashi N, Ona M, Ohyama T. Effects of polymerization shrinkage on the interfacial stress at resinmetal joint in denture-base: A non-linear FE stress analysis. Dental Materials. 2006;22:413-9.
  24. Pesun S, Mazurat RD. Bond strength of acrylic resin to cobalt-chromium alloy treated with the Silicoater MD and Kevloc systems. Journal-Canadian Dental Association. 1998;64:798-802.
  25. Van Meerbeek B, Peumans M, Poitevin A, Mine A, Van Ende A, Neves A, et al. Relationship between bondstrength tests and clinical outcomes. Dental Materials. 2010;26:e100-e21. 
  26. Barclay CW, Spence D, Laird WRE, Marquis PM, Blunt L. Micromechanical versus chemical bonding between Co-Cr alloys and methacrylate resins. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2007;81:351-7.
  27. Kermabon-Avon G, Bressy C, Margaillan A. Statistical design strategies to optimize properties in miniemulsion polymerization of methyl methacrylate. European Polymer Journal. 2009;45:1208-16.
  28. Silikas N, Al-Kheraif A, Watts DC. Influence of P/L ratio and peroxide/amine concentrations on shrinkage-strain kinetics during setting of PMMA/MMA biomaterial formulations. Biomaterials. 2005;26:197-204.
  29. Yucel MT, Kilic I, Okutan Y, Tobi ES, Kilic HS, Kepceoglu A, et al. Effect of different surface treatments on the shear bond strength of resin cement to zirconia ceramic and metal alloy. Journal of Adhesion Science and Technology. 2018;5:1-12.
  30. Caglar I, Ates SM, Yesil Duymus Z. An in vitro evaluation of the effect of various adhesives and surface treatments on bond strength of resin cement to polyetheretherketone. Journal of Prosthodontics. 2018;4:78-90.
  31. Murray AK, Attrill DC, Dickinson MR. Qualitative assessment of surface topography of XeCl laser etched NiCr alloy. Dental Materials. 2005;21:837-45.
  32. Cho S-A, Jung S-K. A removal torque of the laser-treated titanium implants in rabbit tibia. Biomaterials. 2003;24:4859-63.
  33. Wagner WC. A brief introduction to advanced surface modification technologies. The Journal of Oral Implantology. 1992;18:231-5.
Statistics
Article View: 365
PDF Download: 706