Design and producing blowing mold using Additive manufacturing | ||
| International Design Journal | ||
| Article 6, Volume 9, Issue 4 - Serial Number 32, October 2019, Pages 73-78 PDF (620.99 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/idj.2019.82559 | ||
| Authors | ||
| Youssef R. Hassan1; Mohamed A. El Farahaty2; Mona A. Nassar1; S. Ibrahim1 | ||
| 1Packaging Materials Department, National Research Centre | ||
| 2Printing, publishing and packaging department, Faculty of applied arts, Helwan University | ||
| Abstract | ||
| The application of additive manufacturing (AM) technologies is becoming established in an increasing number of product development sectors. In this present work the advanced AM techniques was applied to blowing mold design and production. Its aim is to do a comprehensive analysis on what AM is doing for the recent and future perspectives in the field of mold’s production. Furthermore, analyses were done on the possible use of Rapid Tooling (RT) techniques based on AM technologies. The aim of this work is to design and preparation blowing mold by polymer AM technique as Fused Deposition Modeling( FDM) for their use and validation in bottle production . | ||
| Keywords | ||
| Additive Manufacturing; Blowing Mold; Design Process; 3D Printing | ||
| References | ||
|
[1] K.Stoeckhert, G.Menning(1998), Mold-Making Handbook, Hanser Publishers, Munich. [2] M. Gierak (1998), Technologiczność konstrukcji opakowań rozdmuchiwanych In: Formowanie wyrobów z tworzyw sztucznych metodąrozdmuchiwania. Plastech, pp. 71-105(in Polish). [3] Campbell, R.I., Bourell, D. and Gibson, I., (2012). Additive manufacturing: rapid prototyping comes of age. Rapid Prototyping Journal, 18 (4), pp. 255 - 258.
[4] E. Alfredo Campo (2006), The Complete Part Design Handbook, Munich, Germany: Hanser, pgs 545-570, [5]Dalgarno, K.W. and Stewart , T.D. (2001) Manufacture of production injection mould tooling incorporating conformal cooling channels via indirect selective laser sintering, Journal Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215(10), pp 1323-1332.
[6] Ferreira, J.C. and Mateusb, A. (2003) Studies of rapid soft tooling with conformal cooling channels for plastic injection moulding, Journal of Materials Processing Technology, 142(2), pp 508-516.
[7] Norwood, A.J., Dickens, P.M., Soar, R.C., Harris, R., Gibbons, G. and Hansell, R. (2004) Analysis of cooling channels performance, International Journal of Computer Integrated Manufacturing, 17(8), pp 669-678.
[8] Formlabs(2016), Injection Molding from 3D Printed Molds: A Study of Low-Volume Production of Small Plastic Parts [9] Stratasys(2016) , Customer Plastic Injection Molding [10] 3D Systems(2015), Making the Impossible Possible. [11] M. Saaksjarvi (2013), K. Hellen, How designers and marketers can work together to support consumers’ happiness, Int. J. of Design, 7(3) 33-44. | ||
|
Statistics Article View: 640 PDF Download: 611 |
||
